NEOREP Digital Reptile Vivarium LCD PID Dimmer Thermostat Heat Mats Ceramic Heaters Lamps PID600

PID600 is one of the latest developed dimmer thermostats.

PID controller stands for proportional integral derivative controller.

The PID controller regulates the temperature by adjusting the current (amps) to the heating device that in turn reduces or increases the amount of electricity it uses and subsequently the amount of heat the source produces.

This makes the thermostat more accurate while the dimming extends the life of the heating element, particularly with incandescent lamps that do not last long with on/off thermostats.

Widely used for regulating temperatures in the following applications:
Reptiles, aquariums, incubators, and greenhouses as well as any other application where a constant temperature is required.

Over and under temperature alarm function.

Please note:-Not suitable for fluorescent compact lamps and mercury vapour lamps.
This is not a timed thermostat and will maintain one constant temperature only.

PLEASE REMEMBER THAT THE TEMPERATURE CAN ONLY BE ACHIEVED IF THE HEATER IS LARGE ENOUGH AND THE TEMPERATURE CAN NOT DROP LOWER THAN THE ROOM AMBIENT TEMPERATURE REGARDLESS OF WHAT THE SETTINGS ON THE THERMOSTAT ARE.

Parameter Settings:
Temperature controlling range: 16~40°C
Temperature measuring range: -40~100°C
Resolution: 0.1°C;
Accuracy: 1.0°C
Input: 1 NTC Sensor Probe
Probe Length 170cm approx.
Product Consumption: 3W
Input Voltage: 220VAC 15%
Control Load: 600 Watt Maximum

Ambient Requirements:
Temperature -10~60°C;
Humidity 20%~85%

240v Fitted UK Plug